Top 5 Best Roofing Shingles: Editor Recommended

The 10 Best Roofing Shingles Reviews:

1. Shingle Stripper Fiberglass

Shingle Stripper Fiberglass

The original Shingle Stripper that you know and can rely on is now in new form. Fiberglass shaft gives you just the right amount of strength built with lightweight capabilities. The Shingle Stripper Fiberglass is your every job roof removal tool!

Highlighted Features:

  • Made in USA
  • Ultra portable fiberglass shaft with comfortable plastic D-Grip
  • 11ga high strength tempered steel welds two pieces to make an extremely durable head and teeth

Buy on Amazon

2. MFM Building Product 47733 ShingleStarter 7.2 in x 33.5 ft

MFM Building Product 47733 ShingleStarter

Self-adhesive membrane that eliminates the need to cut shingle tabs. Comes with a seal tab to prevent wind uplift at the roof edge. Fast installation and the membrane is waterproof and self-sealing around nails and other penetrations. Shingle starter is adhered Directly To the roof deck.

Apply on areas that will receive shingles the same day. Airborne dirt and debris can affect the seal Tab’s ability to properly seal to the shingle. 7.2″ X 33.5′. This product is 50 mil. Thick with a black, granular surface. The roll’s hard core prevents Collapse of roll and thumping on the deck surface. The product is manufactured in United States.

Highlighted Features:

  • The product is manufactured in united states

Buy on Amazon

3. Dollhouse Miniature Roofing Salt & Pepper Square Asphalt Shingles

Dollhouse Miniature Roofing Salt & Pepper Square Asphalt Shingles

How to apply asphalt roofing ***** You will need sharp scissors, a tacky wood glue (or hot glue gun, but it’s not necessary) and a good eye for symmetry. Start by laying the first row upside down flush along the bottom row of your roofing area. Start with the left side of your strip, and cut off any excess.

Lay the second row parallel to it and translated up by about half an inch, to line up the top of the tab slot with the top of the previous row. The edge of the shingle strip should line up with the edge of the roof, but likely only for this row.

Then, lay the third row staggered over to the left by about half a shingle, lined up the same way, with a small section of the strip overhanging the roof. Cut this section off, trimmed to the roof edge. Lay the fourth row so that it is lined up with the second row’s shingles as exactly as possible, and then the fifth row lined up with the third, and so on.

Optional: For a sturdier roof bond, use staples to secure the strip, on sections which will be covered by the next row. When nearing the roof peak, cut a strip to meet flush with the edge if necessary. Make sure the opposite side of the roof is finished the same way before continuing.

To cap the roof, cut off single squares, fold them evenly in half, and glue them overlapping the previous shingle by one quarter inch along the roof peak. For a neat, pressed look to your freshly glued shingles, lay a board over the top and apply weight until the shingles dry. IF you are using outdoors, we suggest using polyurethane on top to waterproof.

Highlighted Features:

  • READ AND UNDERSTAND THE SIZE BEFORE PURCHASING. 8 STRIPS PER PACKAGE. EACH = 1 INCH x 35.25 INCHES
  • SALT & PEPPER Asphalt approximately: 1:12 scale. Covers 144- 157 square inches.
  • This is MINIATURE asphalt strips That Covers Approximately 144- 157 Square Inches ( 8 -35.25″ strips)
  • Installation: Directions are in product description.
  • MINIATURE STRIPS of ASPHALT in other colors sold separately: Red, Brown, Black or Peppered Salt

Buy on Amazon

4. Shingle Stripper Fiberglass XL by MBI Tools – Roof Tear Off Shingle

Shingle Stripper Fiberglass XL by MBI Tools - Roof Tear Off Shingle

The original Shingle Stripper that you know and can rely on is now in new form. Fiberglass shaft gives you just the right amount of strength built with lightweight capabilities. The Shingle Stripper Fiberglass is your every job roof removal tool! Now with an even longer shaft for those harder to reach spots!

Highlighted Features:

  • Made 100% in USA
  • 11ga Steel
  • Lighweight fiberglass handle

Buy on Amazon

5. Western Red Cedar Shingles Red Label in Contractor Packs

Western Red Cedar Shingles Red Label in Contractor Packs

These Western Red Cedar shingles are 18” in length and vary in width from 3” to 8” wide. Red label shingles are a #2 grade that do allow for knots. The face is typically 11” clear or better on the 18” shingle. Limited sapwood and flat grain are allowed. Limited knots and defects are allowed above the clear portion.

There are occasional splits in the individual shingles. This shingle is 3/8” to 7/16” thick on the butt end and tapers to an average 1/8” thickness. This is a contractor pack that covers 20 to 25 square feet with a 7″ exposure of the shingle. Ideal for new construction, repairs and outdoor projects.

The red label shingles are recommended for exterior or interior walls and are not recommended for residential or commercial roofing. We also carry this shingle and other shingles in hobby and contractor packs for sale through our online store.

Highlighted Features:

  • Western Red Cedar Shingle
  • 18” long and 3” to 8” wide shingles
  • 3/8” to 7/16” thick on the butt end and tapers to 1/8” thickness
  • Covers 20-25 square feet with a 7″ exposure of the shingle
  • ***This product cannot ship to P.O. box. Ships to Continential US only***

Buy on Amazon

6. Bully Tools 14-Gauge Shingle Shovel

Bully Tools 14-Gauge Shingle Shovel

Bully Tools Shingle Shovels feature a design preferred by professionals. True 14 gauge steel with a back fulcrum tears through roofing shingles with the perfect power and leverage. The triple wall fiberglass handle resists breakage while still being lightweight and easy to handle.

The Dgrips have been redesigned for superior comfort and durability. Made with a special no-break Polypropylene co-polymer, you won’t find a stronger dgrip! Watch our video to see it crush a cement block!

Highlighted Features:

  • 100% Made in the USA
  • Commercial grade
  • Limited lifetime warranty
  • True 14 gauge steel
  • Not just a plastic Dgrip! No-Break Polypropylene Co-Polymer Dgrip with extra wide design and no-slip texture

Buy on Amazon

7. Guardian 54-Inch Shingle Removal Shovel #2560P

Guardian 54-Inch Shingle Removal Shovel #2560P

Lightweight and versatile. Rugged all-steel construction with heat tempered work edge. Ergonomically designed to reduce worker fatigue. For use with most roof pitches. Leverage applied by the offset steel handle’s design reduces the force needed to lift and remove shingles.

Highlighted Features:

  • Rugged All Steel Construction
  • Heat tempered work edge
  • Lighweight & versatile
  • Ergonomically designed to reduce fatigue
  • Pulls up to 16D nails with Nail Pull

Buy on Amazon

8. 4/09 Shingle Gauge, Engineering Shingle Gauge Tool

4/09 Shingle Gauge, Engineering Shingle Gauge Tool

Shingle Gauge is a measuring tool for roof tiles, providing the most accurate estimation tool. It is a portable roof tool and equipment. Professional claims adjusters and roofers always prepare measurement products. Of course, Ordinary homeowners can also use it.

Confirm the type of shingle, and then match it on Shingle Gauge Match the corresponding estimated value. Butt the ruler with the Shingle Gauge, without the adhesive on the tiles. Stop at the place of least resistance to provide an accurate estimate.

4/09 refers to the testing date/version of this Shingle Gauge Modified asphalt shingles do not conform to the 4/09 Shingle Gauge, Due to changes, use this gauge on shingles manufactured January 2011 or before .

Highlighted Features:

4/09 Shingle Gauge estimates the warranty level of asphalt composition shingles 3-tab Fiberglass, 3-tab Organic, and Laminated. Measures the thickness of shingle and based on analyses correlates that thickness to warranty level. Designed with the strictest analytical tolerances possible.

This is a roofing tools and equipment that is designed with the strictest analytical tolerances and is to evaluate the relationship between the thickness of shingle and the warranty period.

The shingle gauge is equipped with carabiner, which is convenient to carry during use. The roof shingles measuring tool has a 5-inch ruler on one side. This gauge is for use only on asphalt composition shingles installed prior to January 2011.

Buy on Amazon

9. Shingle Stripper (4 Pack) by MBI Tools – Roof Tear Off, Shingle

Shingle Stripper by MBI Tools - Roof Tear Off, Shingle

Four pack of the ultimate roof removal tool. The shingle stripper removes shingles AND nails all in one swift motion. Tearing down any roof is a breeze! 100% made in the USA.

Highlighted Features:

  • Made in USA
  • Robotic welds for strength & durability
  • 11ga high strength tempered steel
  • Light weight steel with comfortable plastic D-Grip

Buy on Amazon

10. Roofing with Asphalt Shingles

Roofing with Asphalt Shingles

More than 80% of the homes in North America are roofed with asphalt shingles. Whether you’re shingling your own house or tackling roofs every day, Roofing with Asphalt Shingles will help you improve the production, appearance,

Highlighted Features:

  • Language ‏ : ‎ English
  • Paperback ‏ : ‎ 256 pages
  • ISBN-10 ‏ : ‎ 1561585319
  • ISBN-13 ‏ : ‎ 978-1561585311
  • Item Weight ‏ : ‎ 1.65 pounds
  • Dimensions ‏ : ‎ 8.5 x 0.47 x 11 inches

Buy on Amazon

Write A Comment