Top 5 Best Roof Shingles: Editor Recommended

The 10 Best Roof Shingles Reviews:

1. MFM Building Product 47733 ShingleStarter 7.2 in x 33.5 ft

MFM Building Product 47733 ShingleStarter

Self-adhesive membrane that eliminates the need to cut shingle tabs. Comes with a seal tab to prevent wind uplift at the roof edge. Fast installation and the membrane is waterproof and self-sealing around nails and other penetrations. Shingle starter is adhered Directly To the roof deck.

Apply on areas that will receive shingles the same day. Airborne dirt and debris can affect the seal Tab’s ability to properly seal to the shingle. 7.2″ X 33.5′. This product is 50 mil. Thick with a black, granular surface. The roll’s hard core prevents Collapse of roll and thumping on the deck surface. The product is manufactured in United States.

Highlighted Features:

  • The product is manufactured in united states

Buy on Amazon

2. Dollhouse Miniature Roofing Salt & Pepper Square Asphalt Shingles

Dollhouse Miniature Roofing Salt & Pepper Square Asphalt Shingles

How to apply asphalt roofing  You will need sharp scissors, a tacky wood glue (or hot glue gun, but it’s not necessary) and a good eye for symmetry. Start by laying the first row upside down flush along the bottom row of your roofing area. Start with the left side of your strip, and cut off any excess.

Lay the second row parallel to it and translated up by about half an inch, to line up the top of the tab slot with the top of the previous row. The edge of the shingle strip should line up with the edge of the roof, but likely only for this row.

Then, lay the third row staggered over to the left by about half a shingle, lined up the same way, with a small section of the strip overhanging the roof. Cut this section off, trimmed to the roof edge. Lay the fourth row so that it is lined up with the second row’s shingles as exactly as possible, and then the fifth row lined up with the third, and so on.

Optional: For a sturdier roof bond, use staples to secure the strip, on sections which will be covered by the next row. When nearing the roof peak, cut a strip to meet flush with the edge if necessary. Make sure the opposite side of the roof is finished the same way before continuing.

To cap the roof, cut off single squares, fold them evenly in half, and glue them overlapping the previous shingle by one quarter inch along the roof peak. For a neat, pressed look to your freshly glued shingles, lay a board over the top and apply weight until the shingles dry. IF you are using outdoors, we suggest using polyurethane on top to waterproof.

Highlighted Features:

  • READ AND UNDERSTAND THE SIZE BEFORE PURCHASING. 8 STRIPS PER PACKAGE. EACH = 1 INCH x 35.25 INCHES
  • SALT & PEPPER Asphalt approximately: 1:12 scale. Covers 144- 157 square inches.
  • This is MINIATURE asphalt strips That Covers Approximately 144- 157 Square Inches ( 8 -35.25″ strips)
  • Installation: Directions are in product description.
  • MINIATURE STRIPS of ASPHALT in other colors sold separately: Red, Brown, Black or Peppered Salt

Buy on Amazon

3. PacTool International RS501 Roof Snake

PacTool International RS501 Roof Snake

Roofers, plumbers, and siders, take the bite out of replacing shingles with Roof Snake. This handy tool allows you to nail replacement 3-tab style shingles into place without damaging the shingles on the row above, and it provides you with a useful tool for removing nails from roof shingles. Simply drive the claw end under the nail, and roll the nail out by twisting the Roof Snake.

Highlighted Features:

  • Your best friend for roof shingle replacement! The roof snake makes replacing composition shingles safer, easier and more accurate than traditional methods
  • Patented offset nail-slot feature –unique design helps you align roofing nails with the proper one-inch offset from the bottom edge of your the existing Course
  • Damage-free shingles – replace and install 3-tab shingles without over-bending or striking surrounding shingles (or fingers! ) with your hammer
  • Claw tip – shingle nail puller claw removes nails easily from roof shingles. Drive the claw end under the nail and roll the nail out by twisting the roof snake
  • Essential tool for roofers – the roof snake takes the bite out of replacing shingles to start and finish the job The right way

Buy on Amazon

4. Extreme Max 5600.3207 Shingle-Saver 21′ Roof Snow Rake

Extreme Max 5600.3207 Shingle-Saver 21' Roof Snow Rake

Remove the snow from your roof quickly and easily with the Shingle-Saver Roof Snow Rake from Extreme Max Products. Offering a reach of up to 21′, there are not many itches this rake can’t scratch. The roof rake’s 7″ x 24″ blade comes equipped with blade rollers that give you the close shave you need without damaging a single shingle.

Built of lightweight aluminum, this roof rake is easy to maneuver and corrosion resistant. When the job is complete, simple snap-buttons allow a quick handle disassembly for storage in even the smallest garage corners.

Highlighted Features:

  • Angled blade offers more use in less space and is effective on low pitched roofs and two-story houses
  • 21′ reach with 7″ x 24″ blade provides superior snow removal
  • Blade rollers protect your shingles while still providing a close shave
  • Lightweight aluminum makes it easy to maneuver and corrosion resistant
  • Easy snap-button handle assembly and disassembly

Buy on Amazon

5. Dollhouse Miniature Red Square Asphalt Shingles

Dollhouse Miniature Red Square Asphalt Shingles

This 8 piece set of 36 inch long strips covers approximately 157 -177 square inches which is equivalent to 1.09 -1.23 square ft. ***** How to apply asphalt roofing ***** You will need sharp scissors, a tacky wood glue (or hot glue gun, but it’s not necessary) and a good eye for symmetry.

Start by laying the first row upside down flush along the bottom row of your roofing area. Start with the left side of your strip, and cut off any excess. Lay the second row parallel to it and translated up by about half an inch, to line up the top of the tab slot with the top of the previous row.

The edge of the shingle strip should line up with the edge of the roof, but likely only for this row. Then, lay the third row staggered over to the left by about half a shingle, lined up the same way, with a small section of the strip overhanging the roof. Cut this section off, trimmed to the roof edge.

Lay the fourth row so that it is lined up with the second row’s shingles as exactly as possible, and then the fifth row lined up with the third, and so on. Optional: For a sturdier roof bond, use staples to secure the strip, on sections which will be covered by the next row.

When nearing the roof peak, cut a strip to meet flush with the edge if necessary. Make sure the opposite side of the roof is finished the same way before continuing. To cap the roof, cut off single squares, fold them evenly in half, and glue them overlapping the previous shingle by one quarter inch along the roof peak.

For a neat, pressed look to your freshly glued shingles, lay a board over the top and apply weight until the shingles dry. IF you are using outdoors, we suggest using polyurethane on top to waterproof.

Highlighted Features:

  • SIZE: 8 strips per package. Each = 1 INCH x 36 INCHES
  • RED Asphalt approximately: 1:12 scale. Covers 144- 157 square inches.
  • This is MINIATURE asphalt strips That Covers Approximately 144- 157 Square Inches ( 8 -36″ strips)
  • Installation: Directions are in product description.
  • MINIATURE STRIPS of ASPHALT in other colors sold separately: Red, Brown, Black or Peppered Salt

Buy on Amazon

6. 4/09 Shingle Gauge, Roof shingles measuring tool

4/09 Shingle Gauge, Roof shingles measuring tool

Note: 4/09 refers to the testing date/version of this Shingle Gauge Modified asphalt shingles do not conform to the 4/09 Shingle Gauge, Due to changes, use this gauge on shingles manufactured January 2011 or before .

Highlighted Features:

  • 4/09 Shingle Gauge estimates the warranty level of asphalt composition shingles 3-tab Fiberglass, 3-tab Organic, and Laminated
  • Use Shingle Gauge to check the thickness of shingle to better estimate the warranty period.
  • This is a roofing tools and equipment that is designed with the strictest analytical tolerances and is to evaluate the relationship between the thickness of shingle and the warranty period.
  • The shingle gauge is equipped with carabiner, which is convenient to carry during use. 2. SHIGLE GAUGE has a 5-inch ruler on one side.
  • This gauge is for use only on asphalt composition shingles installed priorto tanuary 2011.

Buy on Amazon

7. 4 Pieces Replacement Wheels

4 Pieces Replacement Wheels

Practical to use: The only contact between our rake and the roof is this black wheel snow rake accessory, ensuring that your rake will not damage your roof shingles while clearing snow piles and preventing metal blades from damaging your roof.

This replacement wheel features a compact size, easy to store and carry, suitable for taking with you when you go to your grandfather’s house in the country to clean the snow piles on the roof of the old man’s house, and also suitable for cleaning your own yard, garage roof, kitchen roof, etc.

Highlighted Features:

  • Package quantity: the package comes with 4 pieces of shingle saver roof snow rake wheels, available in black, enough quantity to meet your use or replacement demand
  • Appropriate size: the size of the replacement wheel is approx. 3.7 x 2.5 cm/ 1.46 x 0.98 inches, the right size makes it suitable for attaching to a wide variety of roof snow rakes
  • Protect your roof: the only contact between our rake and the roof is this replacement wheel, ensuring that your rake will not damage your roof shingles while clearing snow piles and preventing metal blades from damaging your roof
  • Serviceable material: the black replacement wheels are made of PP material, not easy to damage or deform, lightweight and practical, can provide you with a long time of service
  • Portable to carry: the replacement wheel features a compact size, easy to store and carry, suitable for taking with you when you go to your grandfather’s house in the country to clean the snow piles on the roof of the old man’s house

Buy on Amazon

8. Western Red Cedar Shingles Red Label

Western Red Cedar Shingles Red Label

These Western Red Cedar shingles are 18” in length and vary in width from 3” to 8” wide. Red label shingles are a #2 grade that do allow for knots. The face is typically 11” clear or better on the 18” shingle. Limited sapwood and flat grain are allowed. Limited knots and defects are allowed above the clear portion.

This shingle is 3/8” to 7/16” thick on the butt end and tapers to an average 1/8” thickness. This shingle is sold in packs of 12 square feet. This is an ideal pack size for birdhouses, small repairs, outdoor projects, and hobbies.

The red label shingles are recommended for exterior or interior walls and are not recommended for residential or commercial roofing. This shingle and other types of shingles are also available in larger contractor packs at our online store.

Highlighted Features:

  • Western Red Cedar Shingle
  • 18” long and 3” to 8” wide shingles
  • 3/8” to 7/16” thick on the butt end and tapers to 1/8” thickness
  • Total of 12 square feet in pack which averages 8 running feet of the 18” shingle
  • This pack should cover 4-6 sqft with an 8″ exposure on shingle.

Buy on Amazon

9. Western Red Cedar Shingles Red Label in Contractor Packs

Western Red Cedar Shingles Red Label in Contractor Packs

These Western Red Cedar shingles are 18” in length and vary in width from 3” to 8” wide. Red label shingles are a #2 grade that do allow for knots. The face is typically 11” clear or better on the 18” shingle. Limited sapwood and flat grain are allowed. Limited knots and defects are allowed above the clear portion.

There are occasional splits in the individual shingles. This shingle is 3/8” to 7/16” thick on the butt end and tapers to an average 1/8” thickness. This is a contractor pack that covers 20 to 25 square feet with a 7″ exposure of the shingle. Ideal for new construction, repairs and outdoor projects.

The red label shingles are recommended for exterior or interior walls and are not recommended for residential or commercial roofing. We also carry this shingle and other shingles in hobby and contractor packs for sale through our online store.

Highlighted Features:

  • Western Red Cedar Shingle
  • 18” long and 3” to 8” wide shingles
  • 3/8” to 7/16” thick on the butt end and tapers to 1/8” thickness
  • Covers 20-25 square feet with a 7″ exposure of the shingle
  • ***This product cannot ship to P.O. box. Ships to Continential US only***

Buy on Amazon

10. 4/09 Shingle Gauge, Engineering Shingle Gauge Tool

4/09 Shingle Gauge, Engineering Shingle Gauge Tool

Shingle Gauge is a measuring tool for roof tiles, providing the most accurate estimation tool. It is a portable roof tool and equipment. Professional claims adjusters and roofers always prepare measurement products. Of course, Ordinary homeowners can also use it.

Highlighted Features:

  • 4/09 Shingle Gauge estimates the warranty level of asphalt composition shingles 3-tab Fiberglass, 3-tab Organic, and Laminated.
  • Measures the thickness of shingle and based on analyses correlates that thickness to warranty level.Designed with the strictest analytical tolerances possible.
  • This is a roofing tools and equipment that is designed with the strictest analytical tolerances and is to evaluate the relationship between the thickness of shingle and the warranty period.
  • The shingle gauge is equipped with carabiner, which is convenient to carry during use. The roof shingles measuring tool has a 5-inch ruler on one side.
  • This gauge is for use only on asphalt composition shingles installed prior to January 2011.

Buy on Amazon

Write A Comment